Crown Machinery Bearing Co,.Ltd

Four-Point Contact Bearings

Four-point contact ball bearings are radial single row angular contact ball bearings with raceways that are designed to support axial loads in both directions. For a given axial load, a limited radial load can also be supported.The bearings are separable, i.e. the outer ring with ball and cage assembly can be mounted separately from the two inner ring halves.

Both inner ring halves of four-point contact ball bearings have a recessed shoulder. This improves oil flow when the bearing is used in combination with an SKF cylindrical roller bearing.  In addition, these recesses can be used to facilitate dismounting.

operating temperature range: FAG (Schaeffler) QJ311-MPA Four-Point Contact Bearings
FAG (Schaeffler)
QJ311-MPA
standards met: Kaydon Bearings JU090XP0 Four-Point Contact Bearings
Kaydon Bearings
JU090XP0
closure type: RBC Bearings KA065XP0 Four-Point Contact Bearings
RBC Bearings
KA065XP0
outside diameter: RBC Bearings KG065XP0 Four-Point Contact Bearings
RBC Bearings
KG065XP0
operating temperature range: FAG (Schaeffler) QJ211-TVP Four-Point Contact Bearings
FAG (Schaeffler)
QJ211-TVP
outer ring width: FAG (Schaeffler) QJ310-MPA-C3 Four-Point Contact Bearings
FAG (Schaeffler)
QJ310-MPA-C3
outside diameter: Kaydon Bearings KG080XP0 Four-Point Contact Bearings
Kaydon Bearings
KG080XP0
inner ring width: Kaydon Bearings KD047XP0 Four-Point Contact Bearings
Kaydon Bearings
KD047XP0
◂ Previous page
All Products Contact Now
Product Categories
Crowned & Flat Yoke Rollers
Angular Ball Bearing
Bearing End Caps & Covers
Plates & Adapters
NF-Type
Keystock
Four-Point Contact Bearings
Ball Bearings
EZ Kleen Bearings